TP4056 Linear Li-ion cnarger 3A or othrer (0,4A - 4A)
### DESCRIPTION
This board is designed to charge 1 li-ion battery with 3A current performed on TP4056 chips. With good cooling through the thermal padding it is possible to increase the current to 4A. Or else you can adjust the current to 2A, reducing the board's heating to a minimum.
For example, this charging is suitable for fast charging LG HG2 18650 (charge current 3A max).
Non-standard application of this board is an LED driver for direct current.
### TECHNICAL DETAILS / COMPONENTS
Assembly parts:
- 4pcs TP4056
- 4pcs 0805 resistor (1.2KΩ - current 4A - only heat sink, through thermo-laying)
(1.5KΩ - current 3.12A - desirable heat sink, through thermo-laying)
(3KΩ - current 1.6A - no need heat sink)
(other current see in datasheet TP4056)
- 7pcs 0805 10uF or more ceramic capasitor (6,3v on more)
- 1pcs 0805 - resistor 1.2KΩ
- 1pcs 3528 SMD RGB LED or any led to LED out pins.
TP4056 Linear Li-ion cnarger 3A or othrer (0,4A - 4A)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(1)
- Engineer Feb 04,2021
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Максим Maxbolt
- Christmas toy from MaX Simple PCB for a Christmas moodMarry Christmas!
- Christmas tree 2019 NeoPixels WS2812B Attiny13 ### DESCRIPTIONChristmas tree as a decoration of the desktop, can be connected via USB power. Pleasa...
- Led lamp T10 or W5W for car ### DESCRIPTIONCar lamp t10 or W5W. Of the features - no polarity, installation by either side, adde...
- TP4056 Linear Li-ion cnarger 3A or othrer (0,4A - 4A) ### DESCRIPTIONThis board is designed to charge 1 li-ion battery with 3A current performed on TP4056...
- Soft start for LED (max current 2A) or Arduino load control (max current 2A) ### DESCRIPTIONBoard for soft-srart led strip 12V or 24VHave 1 pin control (Cntr) when positive volt...
- Test board 16-channel led driver DM631 (12bit PWM control) ### DESCRIPTIONA test card for debugging the firmware on Arduino or learning the capabilities of thi...
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
128 0 0 -
DIY Laser Power Meter with Arduino
190 0 2 -
-
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
171 0 2 -