Raspberry Pi Pico Breakout Board (GPIO extension)

Presenting a Raspberry Pi pico breakout Board with PINOUTs printed

Dimensions:

• 60mm x 60mm

Features:

• Compact Design
• 4x M2 screw mounts
• 2.54mm pitch Pads
• 2.54mm pitch pin headers compatible
• Extra 3.3V and GND pins for peripherals
• PINOUT printed on Silkscreen
• Raspberry pi pico compatible footprint

Open Source Design:

All the files are Available on Githuib and the design is fully open source. You can use and modify it without Permission under GNU general public license v3.0

Design Request:

Yes! you can request any small modification in the design which is completely free of cost (Valid for Limited Time).

Just hit the comment section to reach us.