Description

Atmega 328P based PWM controller Card

ATMega 328P Based PWM controller Card

As part of my recent ESP-12E I2C Base Board project, I designed an ATMega 328P Based PWM controller card, that can be used as an add-on card with the existing project, or standalone as a custom Arduino Nano compatible development board.

What is on the PCB?

The PWM controller card contains standard Arduino Nano circuitry running at 16MHz, without the USB to Serial converter, as well as a 3v to 5v level converter on the I2C port ( A4 and A5 ), as well as another 12v to 5v level converter, with a build in resistor-divider circuit, used to drive a 12v blower with 3.3v PWM control circuitry.

All analog inputs are broken out to make attaching additional sensors easier.

All the other unused GPIO pins are also broken out, either directly to headers on the PCB (D6~,D7,D8,D9~), D11,D12,D12 (ISCP Header) and D3 ( Marked RPM on the Fan Header)

Most of these pins are also additionally broken out onto the 2x20p female header at the bottom of the card ( See schematic for more details)

The board is designed to be powered from 12v DC (via the VIN pins on the 2x20p header) which is internally regulated down to 5v via an LDO voltage regulator.

External 3.3v should also be supplied to the 2x20Pin header to enable the I2C level converters on the same header. I2C is not directly broken out onto the PCB in this version of the PCB.

A reset button, and power led, as well as the standard led on D13 is also provided.

Code

Coding Instructions

AsciiDoc

This card is compatible with the standard Arduino NANO 16Mhz at 5v. 
Standard Arduino IDE or Platform.IO
No special codeing requirements.
See schematics for pinouts and available GPIO
Note that I2C (A4 and A5) are level converted down to 3.3v to be compatible with the ESP-12E I2C Base Card. These pins are not broken out directly onto the PCB in this version ( for 5v use )

Schematic and Layout

Schematic Page 1

Sheet_1.png

Schematic Page 2

Sheet_2.png

Download BOM(Bill of materials)

Jul 27,2022

1,335 views

Atmega 328P based PWM controller Card

2 Layers PCB 58.5 x 65 mm FR-4, 1.6 mm, 1, HASL lead free, Black Solder Mask, White silkscreen

This is an expansion card for my ESP-12E I2C Base Card. The aim is to offload some functionality onto a secondary processor.

1335

Published: Jul 27,2022

BOM(Bill of materials)

PCBWay Donate 10% cost To Author

Only PCB

PCB+Assembly

Add to cart

*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.

Copy this HTML into your page to embed a link to order this shared project

Copy